The granulator is mainly composed of feeding, mixing, granulating, transmission and lubrication systems. The working process of Haicheng feed machinery is to require a mixed powder with a moisture content of not more than 15%, enter the feed auger from the hopper, adjust the speed of the stepless speed regulation motor to obtain a suitable material flow, and then enter the agitator to pass The stirring rod is agitated and mixed with steam for conditioning. If you need to add molasses or grease, you can also add it from the mixing drum to conditioning with steam. The amount of fat added is generally not more than 3%, otherwise it will be difficult to form. After conditioning, the powder temperature can be mixed Up to 64～85℃, humidity up to 14～l 6%. Then pass through the chute through the optional iron absorption device to remove the iron impurities mixed in the powder, and finally enter the pressing chamber for granulation.

　　 feeder

　　The feeder consists of a speed-regulating motor, a reducer, auger cylinder and auger shaft.

　　The speed regulating motor is composed of a three-phase asynchronous AC motor, an eddy current clutch and a tachogenerator. It is used in conjunction with the JZT controller, and its output speed can be changed through the JDIA electromagnetic speed regulating motor controller.

reducer

Feeding reducer adopts cycloidal pinwheel reducer with a reduction speed ratio of 1.10, which is directly connected to the speed-regulating motor for deceleration, so that the effective speed of the feeding auger is controlled between 12 and 120 rpm.

feeding auger

Feeding auger is composed of auger barrel, auger shaft and bearing with seat. The screw auger plays the role of feeding, and the speed is adjustable, that is, the feeding amount is variable to achieve the rated current and output. The auger shaft can be drawn out from the right end of the auger cylinder for cleaning and maintenance.